Clark's DJ Table · enclosure model · Option A

Enclosure — 3D model

The 172 × 156 mm enclosure with a 10° console slope: a printed tray plus the top control plate, with the knobs, buttons and OLED shown for context. Drag to orbit, scroll to zoom. Generated from the parametric OpenSCAD source; hole sizes come from parts already fitted on earlier printed panels.

Loading model…

Turn the knobs and slide the fader by dragging them · click the buttons to press · drag the background to orbit · scroll to zoom · double-click any part to inspect it (Esc to return).

What you're looking at

Top plate

Carries the fader slot, five encoder holes (two rows), four button holes, the OLED window and the BT LED. Slopes 10° toward you and screws down onto the tray.

Tray

Floor + walls, 45 mm at the front rising to 72.5 mm at the back, with corner bosses for heat-set inserts. The back wall has the USB-B (power + data), optical, coax, 3.5 mm and Bluetooth-antenna cutouts. Boards mount to the floor.

Prints in two pieces

Each part fits the A1 mini's 180 × 180 mm bed in one shot, brim included. Bolt together with heat-set inserts.

Every dimension and control position is a named variable in the source. The optical, coax and 3.5 mm cutouts are still estimates.